STEP BY STEP:
1. Install Radio, Antennas, adapters + UTP cable (RJ45)
Prepare your computer / laptop that is LanCardnya
2. Colokin UTP cable from the radio to the Company / Laptop
We went into radio does mo
3. Contents Computer IP = IP Address: 192.168.1.2
Musk Subnet: 255.255.255.0
4. OK and Close
5. Open the Internet browser, the content of Address: 192.168.1.1 (enter)
6. The contents of User: admin
7. Password: (no password)
After entering the radio
1. Install Radio, Antennas, adapters + UTP cable (RJ45)
Prepare your computer / laptop that is LanCardnya
2. Colokin UTP cable from the radio to the Company / Laptop
We went into radio does mo
3. Contents Computer IP = IP Address: 192.168.1.2
Musk Subnet: 255.255.255.0
4. OK and Close
5. Open the Internet browser, the content of Address: 192.168.1.1 (enter)
6. The contents of User: admin
7. Password: (no password)
After entering the radio
8. Default Senao bridge modes (client)
9. Enter the SSID of the signal was originally addressed
10. The contents of the AP's WEP key if the protection with WEP, if no optional need not use WEP.
11. Save the configuration, and radio will restart some time.
12. Kalo has been restarted, the display will appear signal and link quality, if you connected it will look mac address and SSID of the AP you want to go.
13. Once you connect, you must have the ip address on your computer to be connected to the AP network, you can ask the seller benwitnya.
14.jika no errors can be reset to the initial settings by pressing the reset button in a state of active radio.
15. Oh yes should the PIN / Password is replaced ...
While setting Suneo as its Access Point:
8. Default Senao bridge modes (client) is replaced to AP
9. Enter the SSID of the signal was originally addressed (replace SSID that would be transmitted eg telogodog net)
In the MAC Address Filtering filled radio MAC client
9. Enter the SSID of the signal was originally addressed
10. The contents of the AP's WEP key if the protection with WEP, if no optional need not use WEP.
11. Save the configuration, and radio will restart some time.
12. Kalo has been restarted, the display will appear signal and link quality, if you connected it will look mac address and SSID of the AP you want to go.
13. Once you connect, you must have the ip address on your computer to be connected to the AP network, you can ask the seller benwitnya.
14.jika no errors can be reset to the initial settings by pressing the reset button in a state of active radio.
15. Oh yes should the PIN / Password is replaced ...
While setting Suneo as its Access Point:
8. Default Senao bridge modes (client) is replaced to AP
9. Enter the SSID of the signal was originally addressed (replace SSID that would be transmitted eg telogodog net)
In the MAC Address Filtering filled radio MAC client