Connecting TOOLS AND MEASURE OPTIC

Grafting tools (Fusion Splicer) and measuring tools Fiber Optics (OTDR) is one of the supporting devices in the operational management of the access network Fiber Optics
     For the purposes of Operations and Maintenance (O & M) Network Element that operates using a network acccess Fiber Optics, it is a very important role connecting tools and measuring instruments Fiber Optics. Optical Fiber Access Network as a transport medium for broadband and narrowband services are often susceptible to interference, which formed as a fiber optic cable rupture resulting in Transportation End (Perpu) on the supply terminal equipment and data ports. So to help trouble shooting on Fiber Optic network access control can be done immediately, either in the form of search (searching) the location of cable break penyambunganm Fibre Optic Cable.

Link Tools Fiber Optics (Fusion Splicer)


Fiber Optic Instrument connection known as FUSION SPLICER is a device used to connect fiber optic core that implements the glass-based electrical power that has been transformed into a media-shaped laser beam that heats the glass breaking work on the core that connect back to the good. This splicer grafting tool must have high accuracy so that at the time of grafting (splicing) could be close to perfect, because the process of welding glass media occurs glass melting process that produces a medium which is connected in one piece without a gap because it has a media character who has the same compound. The connection may not be intact, because it does not follow the correct procedure of grafting. When this happens the switching process must be repeated again, until close to the smallest damping distinguished kesilnya (below 0.2 dB) Splicing by welding by means of connection must follow the rules and strict hygiene should be adhered to by a technician because in the event of violations deliberate to facilitate the process of joining it will result in the work is not perfect because it will generate a value of grafting tool that shows Bit Error Rate (BER) is high when applied will lead to forced transmission path to the device will not perfect because it has a resistance.

Completeness:



This results from grafting fiber opticnya:

Once connected, closed this same name joint closure

Fiber Optical measuring instruments (OTDR)








The main tool or the main tools that are needed in carrying out the trouble shooting for problems that occur on the network access without the use of Fibre Optics for Optical Fiber gauge can not do anything against the disturbance.

Fiber Optics measuring tool called the name of the OTDR (Optical Transmission Digital Reflektometer) is a tool to detect the continuity of a fiber optic cable within a certain distance so that it can generate the distance from the two sides which is the size of the disturbance so that trouble shooting can be performed well because it will easily determine the position of the location of the disturbance with reference to the measured distance from the OTDR measurement device.
Dalama implementation of Operation & Maintenance of Fiber Optic network access should be absolutely available tools to determine and carry out trouble shooting in the disturbance at the Optical Fibre access network so that problems can be dealt with as soon as possible to the time not too long.

And to follow up the results of trouble shooting it should be prepared the second tool is an implementation of implementation of the settlement gangguna happens by using a tool called Splicer connection with a complete accessories kit including tools that support the implementation of response time interference will be suppressed as soon as possible.